High-Temperature Heat Treatment Furnace
Heat Master international is recognized as the successful name of High-Temperature Furnace. We use Silicon Carbide Heating Elements for these High-Temperature Furnaces. These can be used for producing technical ceramics and for sintering operations at a working temperature of about 1550° C. The High-Temperature Furnace is equipped with high-quality insulation fiber blocks. The furnace has a multilayered lightweight refractory brick on the heating chamber side. The SiC Heating rod is vertically installed in the furnace in order to provide uniform heating. The SiC rods are controlled by a thyristor controller which counteracts the aging process of the heating elements.
- The maximum operating temperature is 1700° C.
- Heating is provided from both the sides through vertically mounted Silicon carbide rods.
- The SiC rods are controlled by a thyristor controller which counteracts the aging process of the heating elements.
- The customized type swing door is provided with a hinge.
- Multi-layered insulation for better performance.
- For better ventilation, Dual shell housing is provided.
- Lined with lightweight refractory bricks.
- Motor-Driven exhaust provided on the suitable location along with exhaust gas piping.
- These High-Temperature Furnaces are completely automated and run-on SCADA systems with PLCs to control the entire system along with documentation and monitoring.
- High-temperature accuracies with long heater life and refractory life are a feature of these Furnaces.
- Advanced safety concepts are always taken into account while designing any high temp furnace.
- Annealing/Annealing under protective atmosphere
- Isothermal Annealing
- Carbonitriding
- Carburizing
- Decarb annealing
- Gas Nitriding
- Hardening
- Stress Relieving
- Wire annealing
- Ferritic Nitro Carburizing
- Normalizing
- Case Hardening
